How to Disable ABS Brakes On Chevy Silverado?

The red light on the instrument cluster of your Chevy Silverado may be familiar to you. At this moment you may feel the importance of disabling the ABS crakes. 

So, how to disable ABS brakes on Chevy Silverado

To disable ABS brakes on SIlverado, pull the lever located on the bottom left corner of the driver’s side. Check behind a cover on the driver’s side of the instrument panel to find the relay box. Now, identify the ABS relay on the cover of the primary relay box, remove the ABS fuse, then reattach the relay cover to disable the ABS brakes on a Chevy Silverado.

This is just a quick glimpse. If you’d like to learn more about the process, you should read the entire article.

Is It Safe To Disable the ABS System on Chevy Silverado?

Disabling the ABS system on Chevy Silverado can potentially lock up the wheel, but it won’t impact your vehicle’s ability to move. Moreover, it could lengthen the distance required to bring your vehicle to a stop and negatively impact braking performance while maneuvering.

Driving a vehicle without ABS is not illegal, but you may fail your country’s annual roadworthiness inspection if the system malfunctions. In fact, most countries don’t consider it illegal to operate a vehicle with a failed ABS system. SInce the conventional braking system will still work as intended without ABS.

ABS systems are intended to provide effective braking on slippery surfaces. So disabling them is a good idea. When used on dry roads, ABS brakes can increase the distance required to stop the vehicle, potentially causing an accident.

Also, ABS brakes cost between $1,000 and $1,500 per year to maintain. ABS systems can also significantly increase your vehicle’s ongoing maintenance costs, potentially making them unwise investments. So, it is definitely a good idea to disable ABS. Also, disabling it can bypass unwanted ABS brake problems on Chevy trucks.

How To Disable the ABS System on Chevy Silverado?

disable abs brakes on chevy

A straightforward method can be followed if you’re determined to disable the ABS system on your Chevy Silverado. 

Required Tools:

Unlike resetting ABS light without a tool, here you need two important tools. First, let’s get to know them for disabling the ABS system.  

  • Fuse Puller 
  • and Socket Wrench 


Now, it’s time to focus on the step-by-step method for disabling the ABS System.

Step 1: Getting Things Ready

Open the hood of your Chevy Silverado to prepare the interior of your vehicle. In order to do this, pull the lever located on the bottom left corner of the driver’s side of the car, which will produce a clicking sound. Lift the hood completely by sliding your hand under it.

Step 2: Find the Main Relay Box 

The next step is to locate your vehicle’s primary relay box. A Chevy Silverado’s main relay box is usually located behind a cover on the driver’s side of the instrument panel. 

In the event, you are unable to locate it, consult your vehicle’s owner’s manual for assistance.

Step 3: Disabling the ABS Brakes 

You will need to carefully examine the diagram printed on the cover of the primary relay box to identify the location of your ABS relay. When you have located the ABS fuse, use a fuse puller to remove it from the relay. 

Make sure the ABS fuse has been removed successfully before reattaching the relay cover. Your Chevy Silverado’s ABS brakes have been disabled.

How to Reset ABS Light

After disabling the ABS light, if you want to reset it again, you will need an OBD-II scanner tool. Follow the steps below to reset the ABS light.

  • Locate the OBD II port on your vehicle, which most vehicles manufactured after 1996 have. Your car’s location can be found with a quick internet search.
  • Next, plug in the scan tool and turn the ignition to the second position, where the instrument cluster lights up but the engine is not running.
  • You can now clear fault codes on the scan tool by selecting the option. 
  • Unplug the scanner after turning off the ignition. The ABS light should now be reset, so you’re good to go.

Frequently Asked Questions (FAQs):

Which fuse controls ABS?

ABS is controlled by anti-lock fuses and relays. For the electricity to reach the relay and then the second fuse, the initial fuse (a 10 amp fuse) must be functional, and the relay must operate to supply power to the second fuse (a 30 amp fuse).

How come my ABS light won’t turn off?

The ABS light won’t turn off because the ABS component has malfunctioned. There are a variety of factors that can cause this fault, from a voltage drop caused by a faulty battery to a complete ABS system failure. No matter what, the fault will persist and must be reset.

Can you drive with ABS disconnected?

Yes, it is possible to drive with ABS disconnected. However, you shouldn’t run your vehicle without ABS if your car is equipped with it. The ABS system is designed to prevent the wheels from locking up during sudden stops, which can cause loss of control and increase the risk of accidents.


I hope you’ve got to know a clear idea about how to disable ABS brakes on Chevy Silverado. 

Not everyone knows the delicate process of disabling ABS brakes. These simple 3 steps have been described in the article will help you extensively to perform the work.  

Best of Luck!

Related Posts:

Similar Posts