How To Fix Dodge Ram 1500 Starter Problems? (Explained)

For getting you where you need to go and hauling all of your supplies and equipment, the Dodge Ram 1500 is your best bet. No questions asked!

But nothing will make you feel more hopeless than getting into a car only to hear a clicking noise when the ignition is turned. This noise comes on when the vehicle faces starter problems. 

The starter problems on a Dodge Ram 1500 can pop up for several reasons. So firstly, you need to identify which portion is causing this problem. After you locate the part, merely replacing it should do the job.

Fixing the starter issues on a Dodge Ram 1500 is not very difficult. If you know everything about how to fix Dodge Ram 1500 starter problems, you might as well try to fix it yourself. 

The fixing is reasonably simple and doesn’t require that many technical skills.

What Are The Common Dodge Ram 1500 Starter Problems?

A Dodge Ram 1500 can face starter issues if any related parts start causing problems. So, here we’ve discussed the most common Dodge Ram 1500 starter problems so that you can have a better perspective:

Drained Battery

The Dodge Ram 1500 will not start if the battery is entirely dead. It’s also possible that it has gone bad due to age and repeated usage. 

Faulty batteries can be replaced with new batteries to eliminate this problem.

However, in case of a dead battery, you’ll need to jump-start the vehicle with the help of a charger. Don’t forget to recharge it before getting on the road regularly.

Loose Connections

Another reason your Dodge ram 1500 faces a starter problem is that the battery terminal connection is loose or rusted. 

If you have a loose connection, just tightening the bolt should take care of the problem.

Cleaning the battery terminal and connector, on the other hand, will ensure that the connection is even stronger and the vehicle performs correctly when you attempt to start the engine.

For the starting motor and other electrical components to function effectively, there must be a sufficient power flow.

Broken Starter Motor

When the Dodge Ram 1500 has starting troubles, this is one of the most prevalent causes for it to happen.

Surprisingly, most people believe that a starting motor cannot fail at any moment. However, it can fail at any time, and a clicking sound can be the beginning of its demise.

As soon as you notice the click, you should contact a professional who will identify the issue and replace either the defective starting motor or the bad starter relay with an appropriate replacement part.

Fuel Injectors Problem

Issues with the injector can also be the reason why the Dodge Ram 1500 is not starting up. 

If several cylinders fail to ignite simultaneously, this might cause ignition issues, and your vehicle will just keep on clicking.

To permanently resolve the problem, you would want the assistance of a specialist with extensive knowledge in this sector.

Bad Spark Plugs

Another cause for the dodge ram 1500 to only click once and then fail to start is a faulty set of ignition coils. 

Because this is a costly repair, it should only be performed by a professional technician with extensive expertise in dealing with this sort of problem in the first place.

If you have previously attempted to start your vehicle multiple times without success, contacting a reliable mechanic is your best option.

How To Fix Dodge Ram 1500 Starter Problems?

It’s possible the Dodge Ram 1500 won’t start for a variety of reasons, including problems with the battery, injector, or starter. Below we mentioned fixes for all sorts of issues that prevent the Dodge Ram 1500 from starting:

Check the Battery

When the battery can’t start the engine, it’s deemed dead. To begin with, you’ll notice a lack of light inside the car and a sluggish or non-existent crank when you attempt to start it.

In most circumstances, a sharp clicking sound may be heard if the battery has any remaining charge. However, in many cases, the car will be utterly unresponsive.

The warning light will come on, and the engine may shut down if the battery is running low. You can replace this battery and get a new one to prevent this issue.

Replace the Fuel Pump

If your fuel pump starts leaking or making a lot of noise, you should have it checked out as soon as possible. A faulty fuel pump could cause a loss of engine power or prevent the car from starting.

The check engine light is also an indication that your vehicle is facing a problem with fuel supply. So, you might want to replace it with a brand new pump.

Check the Starter

When a car’s starter motor fails, the resulting symptom is the same regardless of make or model. The starter solenoid will click when you turn the key, but the engine will not turn.

After turning the key, you’ll probably hear it whirr or spin quickly. A check of the starter solenoid is required in this kind of situation.

Ignition Switch Replacement

Depending on the position of the key, the vehicle will either lose power to some specific systems temporarily or permanently.

It’s possible that the air conditioner won’t work or the vehicle won’t start. The car can stall while driving or not respond to the movement of the key in some cases. 

Due to these symptoms, it may require some time just before the ignition switch ultimately fails.


We hope that all of your questions have been addressed. You can surely do it yourself now that you know how to fix Dodge Ram 1500 starter problems. 

In addition, this activity does not need a very high level of technical expertise. Just make sure you have all the necessities required to get started.

As long as you pay attention to each step, you should be able to replace the brake pads very easily. 

Before you finish, be sure that all of the components of your Dodge Ram 1500 are securely fastened and correctly fitted, and you should be good to go!

Related Posts:

Similar Posts