How many ignition coils in a V6 engine are installed?

For the voltage to be applied to the spark plug, any engine has such a necessary component as an ignition coil. Coils are available in any engine, regardless of their size, but in different quantities.

ignition coils

How many ignition coils in a V6 engine?

In modern cars, as a rule, one coil per plug is installed. So, how many coils does a V6 engine have?

If you have a six-cylinder engine, then most likely 6 spark plugs and 6 coils will be installed in it.

However, depending on the manufacturer and the year of manufacture of the engine, the V6 engine may have 1, 3, or 6 coils.

What is an ignition coil?

The ignition coil is copper wires wrapped on a piece of iron with two sets of windings. Windings are loops of wires, with primary and secondary loops.

The primary coil winding is made of thick copper wires wrapped hundreds of times. But the secondary winding loop is made of very thin wire and the number of turns is about thousands.

This allows you to increase the battery voltage level to get a good spark.

Ignition coil type

If we are talking about cars that have been produced over the past 30 years, then their design may have either one or more coils – it all depends on the manufacturer.

Designs may include a single ignition coil, coil pack, or coil per cylinder.

Original ignition coil type

All cars before the 1990s had a single coil, which provided a spark for all the spark plugs.

At the same time, the size of the engine did not matter, both the 4-cylinder, 6-cylinder, and 8-cylinder engines had only one ignition coil. Only the size of the coil could differ – there was a larger coil on a larger engine.

Where is the coil on the plug ignition coil?

In most modern cars, the COP ignition system (coil on plug) is used. Each cylinder has its coil, which is controlled by the PCM (powertrain control module).

In this case, the coil is placed directly above the plug, and then there is no need for spark plug wires.

How many ignition coils are there in a V8 engine?

Before answering this question, you need to find out what type of V8 engine is in your car, as well as what number of cylinders there are.

Depending on the year of manufacture and manufacturer, the V8 engine can have one, four, or eight coils (one spark plug per cylinder).

But in the latest HEMI engines with multiple displacement systems and engines with two sparks without a distributor, two spark plugs are installed per cylinder, which means there will be 16 coils.

However, this works when it comes to gasoline engines.

Why is my ignition coil pack not working?

If your car has started to miss the ignition, run erratically at idle or fluctuate during acceleration, then the reason may be a faulty coil pack.

However, by applying the right spark to the plug, you can solve these problems.

What are the signs of a faulty spark plug or ignition coil?

If the plug or coil is faulty, then you will see the following signs:

  • There may be problems with starting the car.
  • The engine check light will be on.
  • Engine shaking when the ignition is missed.
  • More emissions.
  • Fuel consumption is increasing
  • Increased spark plug gap.

If you have a bad spark plug installed, this can cause ignition failures in the cylinder combustion chamber, and, as a result, problems with driving.

What types of engine spark plugs are there?

You can find 4 types of spark plugs:

  • Silver spark plugs are not the most effective, but they work great with old cars.
  • Copper spark plugs are middle–class plugs, and have a low melting point.
  • Platinum spark plugs – last longer than copper spark plugs and reduce carbon buildup.
  • Iridium spark plugs – have a high melting point and last longer than platinum ones.

How often do I need to change spark plugs?

The frequency of spark plug replacement depends on the type and length of your plugs.

  • Silver spark plugs last up to 20,000 miles.
  • Copper spark plugs need to be changed every 30,000-50,000 miles.
  • Platinum or iridium spark plugs need to be changed every 50 000 – 120 000 miles.

Should I replace all ignition coils at once?

If your six-cylinder engine has 6 coils installed, then if one of them fails, you can replace only one coil.

There is no need to replace the working coils with new ones every time one of the coils fails.

Frequently Asked Questions

How many coils does a V6 engine have?

In modern cars, as a rule, one coil per spark plug is installed. If you have a six-cylinder engine, then most likely it will have 6 spark plugs and 6 coils installed in it.

How many spark plugs are in a V6 engine?

Six spark plugs are installed in the V6 engine.

How many ignition coils does a 4 cylinder engine have?

If you have a four-cylinder engine, then most likely it will contain 4 spark plugs and 4 ignition coils.


In modern cars, there is one ignition coil per spark plug. This means that if your engine is a six-cylinder, then you will have 6 coils.

Similar Posts