How To Fix Chevy Silverado Clunking Noise When Accelerating?

There are a number of reasons behind the clunking noise from the Chevy Silverado. This may be for low transmission fluid, hard accelerator bolts, damaged axle bearing, loose front wheel bolts, and many more. But sometimes Chevy Silverado may create this sound while accelerating.

But why does this happen and how to fix it? This article is going to help you if your Chevy Silverado also creates this type of sound. We are going to find some reasons behind this and also find some solutions. So, let’s see. 

Why Does Chevy Silverado Clunking Noise When Accelerating?

We have seen that there are several possible reasons behind the clunking sound on the Chevy Silverado when accelerating. Some reasons are so obvious that we can solve these problems at home easily. 

The main cause may be the low transmission fluid of your vehicle. While accelerating our engine, the transmission starts working. But if the fluid is low in the gear transmission section, it starts creating such sound. In this case, if you want to solve this problem, you have to work on this.

Another possible cause of this problem is the front axle bearing problem. In this case, the solution is much tougher and lengthy. You may have to work on this area too if the clunking sound comes from after acceleration.

How to Fix Chevy Silverado Clunking Noise When Accelerating?

If you want to solve the clunking sound of a Chevy Silverado that comes after the acceleration, then you have to find the actual cause behind it first. As we find two causes of this problem that have the most possibility, we will work on these two only.

If the Transmission Fluid is Low

We know that the low transmission fluid is one of the causes behind the clunking sound of your Chevy Silverado. If you are also facing this problem then you may follow the following steps to fix it now.

Step 1: Check the Transmission Fluid

At the beginning of the solution, you have to check the fluid level of your transmission gearbox. There is a traditional method of checking the fluid level. You may follow that method. That is the best way to measure how much fluid you have on this part of your vehicle.

Step 2: Check Fluid Thickness

Besides checking the fluid level, you also have to test the thickness of the fluid. As we know after a certain period of time, the fluid becomes thick and color changes. That means the fluid is outdated. It’s time to change it as soon as possible.

Step 3: Refill The Fluid

After checking the fluid level and thickness you will find the level is lower than expectations. In that case, you have to drain all the transmission fluids. You also have to remove the transmission fluid filter. Then you have to enter new fluid in the tank. Keep the recommended fluid level. This will help the transmission system work smoothly and there will be no clunking sound when you are accelerating your truck.

If Front Axle Bearing Has Problem

Another possible cause of clunking sound when accelerating is the front axle bearing problem. Most of the time the front wheel axle creates such sound. Let’s see how to fix this.

Step 1: Identify Source of Sound

First of all, you have to identify from which bearing the sound is coming. If it is from the left wheel then we have to work on that. But if it is on the right wheel then we will have to work on the right one. So identifying the source of sound is very important.

Step 2: Remove the Wheel and Bearing

When the sound source identification is done, we have to remove the wheel from the axle. If the wheel is removed, the bearing will appear in front of you. You have to use a puller and then bring out the bearing from the inside part of the axle.

Step 3: Replace the Old Bearing

When the bearing removal process is done, you have to bring a new bearing and replace the old one. This is the main part of this process.

Step 4: Re-Setup Everything

When all the steps are done, you have to fix the wheel in its position. Always try to tighten the ring bolt as much as possible. The loose wheel may also create such a sound.

How Much Does it Cost to Fix?

The cost of fixing Chevy Silverado Clunking Noise When Accelerating depends on the actual problem it is facing. If the problem is in the transmission fluid then the cost will be around $80 to $120. It may be lower or higher based on your location. 

But if the problem is in the front wheel bearing then the cost will be higher than the previous one. It will cost around $250 to $400. If you can do that at home then the cost will be less.

Conclusion

That was all about the cause and solution of Chevy Silverado Clunking Noise When Accelerating. If you face any problem while changing transmission fluid, you may take help from another article on our website.

Related Posts: